EC:Analog/Digital Mixed
| EtherCAT Remote IO Module Selection | |
| Product model | Model description |
| EC-DA8844PC |
Supports EtherCAT protocol,dual network port, Digital 8 channel DI input, 8 channel DO output,PNP Analog 4 channel AI input, 4 channel AO output (current type),0～20mA/4～20mA |
| EC-DA8844NC |
Supports EtherCAT protocol,dual network port, Digital 8 channel DI input, 8 channel DO output,NPN Analog 4 channel AI input, 4 channel AO output (current type),0～20mA/4～20mA |
| EC-10RT |
Supports EtherCAT protocol,dual network port,Thermal resistance RTD 10channel DI input(Cu50/Pt100 etc., or 0~1kΩ signal), 0～20mA/4～20mA |
| EC-16TC | Supports EtherCAT protocol,dual network port,Thermocouple TC 16 channel DI input (K.J.T.E.N.S.R.B type, etc.),0～20mA/4～20mA |
| Name | EtherCAT Interface |
| Interface Parameters | |
| Data transmission medium | Ethernet CAT 5 Cable |
| Connection Type | 2*RJ45 |
| transmission rate | 100Mb/s |
| transmission distance | 100m（Station distance） |
| electric isolation | Have |
| Technical Specification | |
| toggle switch | Upgrade the firmware. The default value is 0. Upgrade the module X1 DIP bit |
| Rated Voltage | 24VDC |
| Ring Redundancy | Support |
| dual redundant | Not Supported |
| scanning cycle | <3ms |
| PN Number of interfaces | 2 |
| PN interface function | Ethernet switch |
| Network disconnection self-recovery | 3S |
| Channel light | Green LED light |
| dimension | 93*32*122mm（LxWxH） |
| weight | About150g |
| Protection grade | IP20 |
| operating temperature | -10～70℃ |
| Storage temperature | -20～80℃ |
| Relative Humidity | 95 %，No condensation |
| Certification | CE |
