| ProfiNET Remote IO Module Selection |
| Order type |
Model description |
| PN-A44C |
Supports PROFINET protocol,dual network port,Analog 4 channels AI input +4 channels AO output,0～20mA/4～20mA |
| PN-A88C |
Supports PROFINET protocol,dual network port,Analog 8 channels AI input +8 channels AO output,0～20mA/4～20mA |
|
| Name |
Profinet Interface
|
| Interface Parameters |
| Data transmission medium |
Ethernet CAT5 Cable |
| Connection Type |
2*RJ45 |
| transmission rate |
100Mb/s |
| transmission distance |
100m（Station distance） |
| electric isolation |
Have |
| Technical Specification |
| toggle switch |
Upgrade the firmware. The default value is 0. Upgrade the module X1 DIP bit |
| Rated Voltage |
24VDC |
| Ring Redundancy |
Support |
| dual redundant |
Not Supported |
| scanning cycle |
<3ms |
| PN Number of interfaces |
2 |
| PN interface function |
Ethernet switch |
| Network disconnection self-recovery |
3S |
| Channel light |
Green LED light |
| dimension |
93*32*122mm（LxWxH） |
| weight |
About150g |
| Protection grade |
IP20 |
| operating temperature |
-10～70℃ |
| Storage temperature |
-20～80℃ |
| Relative Humidity |
95 %，No condensation |
| Certification |
CE |
